OSHA First Aid Requirements: What the Rule Says, and What It Leaves to the Employer

Last updated

OSHA First Aid Requirements: What the Rule Says, and What It Leaves to the Employer

The federal first aid rule for most American workplaces is two sentences long, and most employers who read it conclude it barely applies to them. The OSHA first aid requirements are short, but the way OSHA has interpreted them, and the industry standards layered on top, ask for more than the text suggests.

This explainer sets out what the general industry standard says, how OSHA has read the phrase “near proximity”, which jobs need CPR as well as first aid, and what an employer should keep on file. It is general information about the federal rules, not legal advice, and state plans can add requirements of their own.

Key facts

  • OSHA’s general industry standard, 29 CFR 1910.151(b), says that without “an infirmary, clinic, or hospital in near proximity to the workplace”, a person or persons “shall be adequately trained to render first aid”, and adequate first aid supplies must be readily available.
  • In a 1990 letter of interpretation, OSHA described the requirement that an injured employee be treated by medical personnel or an employee certified in first aid within 3 to 4 minutes of the injury.
  • OSHA’s own best practices guide lists five standards that require CPR training specifically: 1910.146 (permit-required confined spaces), 1910.266 (logging), 1910.269 (electric power), 1910.410 (commercial diving) and 1926.950 (power transmission and distribution in construction).
  • The construction standard, 29 CFR 1926.50(c), requires first aid training “that can be verified by documentary evidence” and requires first aid kits to be checked before each job and at least weekly.
  • OSHA’s guide recommends that first aid training be assessed by instructor observation of skills and a written assessment, and that instructor-led retraining for life-threatening emergencies happen at least annually.
  • American Aquatics and Safety Training’s combined CPR/AED and First Aid course runs 8 hours 35 minutes in the classroom or 4 hours 50 minutes blended, with an 80 percent written pass mark, two-year validity and an in-person skills evaluation.

What “near proximity” means in practice

The standard does not define near proximity in distance. The clearest marker OSHA has given is time. Its 13 June 1990 letter, written about a construction site working over water, refers to the requirement that an injured employee be treated by medical personnel or an employee certified in first aid within three to four minutes of the injury occurring.

Three to four minutes is not long. Few workplaces have a clinic that close, and an ambulance response is almost never that fast. For most employers, the practical reading of the rule is that someone on site, on every shift, needs to be trained.

Which workplaces need CPR, not only first aid

Section 1910.151 says first aid; it does not say CPR. But OSHA’s Best Practices Guide: Fundamentals of a Workplace First-Aid Program lists standards that do require CPR training, because sudden cardiac arrest from asphyxiation, electrocution or exertion is a foreseeable risk in that work: permit-required confined spaces, logging, electric power generation and distribution, commercial diving, and power line work in construction.

The same guide recommends that AEDs be considered when choosing first aid equipment, notes that every worksite is a potential candidate for an AED program, and says CPR training should include AED training wherever an AED is available. For an aquatic facility, where staff may be first on scene for a drowning or a cardiac arrest on deck, treating first aid without CPR as sufficient is hard to defend.

How to show you meet OSHA first aid requirements

An inspector will want to see who is trained, in what, and when it expires. The construction standard is explicit that training must be verifiable by documentary evidence, and that is good practice everywhere. Keep a current roster by shift, copies of each certification with its issue date, and a record of who checks the first aid kits. Appendix A to 1910.151, which is non-mandatory, points to the ANSI Z308.1 standard for minimum kit contents and suggests using the OSHA 300 and 301 logs to adjust supplies to the injuries that actually occur.

The certification itself has to be the right kind. OSHA’s guide describes a training assessment that includes an instructor observing the skills, which is why a card earned entirely online, with no hands-on evaluation, is a common reason employers find themselves out of compliance. Our explainer on whether an online CPR certification is valid covers that in detail.

What the training actually involves

Our CPR/AED course is 275 minutes (4 hours 35 minutes) in the classroom or 170 minutes (2 hours 50 minutes) of instructor-led time in the blended format. First Aid is 240 minutes in the classroom or 120 minutes blended. The written test pass mark is 80 percent, and the skills evaluation is always conducted in person, with no more than ten students per instructor and two students per manikin. Certification is valid for two years and there is no abbreviated recertification. Our CPR/AED course page sets out what each assessment covers.

Two years is the certification period, but OSHA’s guide cites studies showing CPR and AED skills retained for 6 to 12 months and recommends instructor-led retraining for life-threatening emergencies at least annually. Employers who want to be on the safe side of both can schedule practice sessions between certifications.

Expert view

Jackie Stern, Lifeguard Instructor, Firefighter and EMT, who reviews our course content, said: “The rule says adequately trained, and adequate is measured at the moment someone collapses, not on the day the card was printed. I want every person on a first aid roster to have had their hands on a manikin in front of an instructor, because that is the only way anyone finds out whether their compressions are deep enough before it counts.”

A checklist for employers

  • Time how long it takes to get qualified care to the furthest corner of the site. If it is more than three to four minutes, plan on trained responders on site.
  • Check whether your work falls under one of the standards that require CPR specifically, and train to that level if it does.
  • Cover every shift, including weekends and seasonal hours, not just the office day.
  • Keep certificates with issue dates on file, and diary renewals two months before expiry.
  • Assign one named person to check first aid supplies and, where you have one, the AED.
  • Choose training with an in-person skills evaluation, so the certificate reflects what the person can actually do.

Sources

Reviewed by Jackie Stern, Lifeguard Instructor, Firefighter and EMT. Jackie Stern has taught lifeguarding for more than 20 years and works as a firefighter, EMT and swim instructor. She reviews course content, prerequisites and rescue standards against current certification requirements.

Related reading

American Aquatics and Safety Training, Inc. is a 501(c)(3) nonprofit organization. Tax ID (EIN) 83-4426661.

70 E. Sunrise Highway, Suite 500, Valley Stream, NY 11581

About our organization

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.